Colour Range

• 200 standard colours LINK

• 7 Fluorescent Colours LINK

• 10 Transparent Colours (order on this page)

Pressure: Low

Finish: Matte

Nozzle: Male

Can Size: 400ml

This transparent range complement the standard MTN 94 range, and can be used with other paints. They are a lightly pigmented clear, with a small amount of coloured pigment in them. They are perfect for shading and highlighting artworks and you are able to build up stronger colour the more layers you add.

Colour Range: Black and White

Pressure: Low

Finish: Matte

Nozzle: Male

Can Size: 400ml

Acrylic, fast drying solvent-based paint, available in a range of 9 metallic colours. Formulated from solvent-based acrylic resins of a highly pearlescent nature that gives it a high quality metallic appearance with a glossy and uniform finish.

Suitable for multiple indoor and outdoor uses such as decoration and protection - automobiles, bicycles, decorative objects etc.

Suitable various surfaces: wood, metal, stainless steel, glass, wicker, plaster, ceramic, stone, hard plastic.

Features

- Very fast drying
- Good elasticity
- Easy to apply and recoat
- Excellent adhesion
- Does not contain lead
- Good covering capability
- Excellent gloss finish even without varnishing
- Very good resistance to the sun and rain
- Perfect results both indoor or outdoors
- Can be varnished

The MTN PRO Glass to Mirror Converter is a decorative paint especially suitable for turning any glass into a mirror. The product should be applied on the opposite side of the surface to be converted.

CHARACTERISTICS

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

The MTN PRO Frosted Glass Effect is a decorative paint that gives the appearance of frosted glass to all types of glass and transparent surfaces, making them translucent. This paint is perfect for painting bathroom windows, medical consultations, changing rooms and places where privacy is necessary. The resulting finish will resist regular cleaning with water without its properties being affected.

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

The MTN PRO Bathtub and Tile Paint is a white satin spray paint developed with modified epoxy resins. It is an ideal choice for touching-up or repainting bathtubs, sinks and tiles in one product.

Its excellent adherence and resistance to very humid environments make this product the best option for renovating bathrooms and kitchens, and can also be applied to any porcelain or ceramic surface with optimal results.

The product is only available in white and can be recoated with varnish or paint to modify the colour or level of gloss.

 - Good adhesion to ceramic and porcelain

 - Strong resistance in humid environments

 - Resistant to UV rays

 - Easy to apply

 - Satin white colour

 - Can be painted over with other paints and varnishes

INSTRUCTIONS FOR USE

Shake the can very well before use, for about a minute after hearing the noise of the mixing ball

Apply to clean and dry surfaces, removing mould, grease, soap residue and any other kind of dirt. Prepare the surface with an scrubbing sponge and bathroom cleaning solution to create a slightly porous surface for better adhesion. Clean the entire surface once again and rinse with water. Sand the whole surface with P400 or P600 grit wet / dry sandpaper. Clean and dry before painting.

Apply the product from a distance of 15-20 cm. Apply in thin layers to avoid paint build up. Three thin coats are always better than one thick layer. Always test product on a small area before painting.

The surface can be painted again with the same product after 30-60 minutes. You can apply other products after 24 hours. After 72 hours you can use the bathtub normally.

Once the application is finished, invert the aerosol and purge the valve after use. If the nozzle clogs, replace it with a new one.

Do not apply to equipment connected to the mains and use in well ventilated areas.

• 400ml can

SDS (Safety Data Sheet): Request SDS

Glossy translucent paint with coloured glitter particles for a metallic effect giving objects and artworks of all kinds a refined finish.

Applicable on many different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials.

After being applied, a thin shiny lacquer coat will show with a fine distribution of glitter particles. Further coats will lead to a higher density of particles and intensify of the effect.

Please consider that the achieved final result will significantly be influenced by the colour and gloss level of the undercoat.

The glitter particles are carried in a clear base that can easily be covered with many common lacquer types.

• 400ml can

High-covering spray paint for a deceivingly realistic marble effect. Can be used on many different surfaces such as paper, cardboard, primed canvas, wood, glass, metal, ceramics, porcelain, stone, acrylic and other paintable materials.

The marble effect is formed by very fine coloured paint strands on the surface area of the object in question.

The area which is to be sprayed is not entirely covered and will stay partially visible. Can be top-coated with many common lacquer types once thoroughly dry.

The Marble Effect can comes standard with a calligraphy nozzle that can be adjusted to create spray output lines in vertical, horizontal or variations there of.