*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Previous product name: MTN PRO- Acrylic Varnish 

- Very fast drying
- Good hardness 
- Excellent adhesion
- Good elasticity
- High durability
- Easy to apply and recoat
- Good water resistant
- Non-yellowing
- 400ml can

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside. MTN PRO Canvas Varnish

is a product designed as a final coat to protect oil and acrylic paints against humidity, grease, UV rays, dust, contamination and contact, allowing the work to maintain its properties without yellowing or cracking. Very fast drying through evaporation. Available in different finishes: glossy, matte and satin. For varnishing oil paints, allow for complete drying before using the product.

• Good hardening
• Non-yellowing
• Resistance to UV light
• Good durability
• Easy to apply and repaint
• Good levelling
• Good elasticity
• Fine, non-bulky product
• Less aggressive solvents than ordinary varnishes, less chance of reaction with underlying materials
• Ideal for the protection of acrylics, oils, watercolours, charcoal, etc.
• 400ml can

SDS (Safety Data Sheet): Request SDS

Technical Data Sheet: Technical Data Sheet (.pdf)

Acrylic, fast drying solvent-based paint, available in a range of 9 metallic colours. Formulated from solvent-based acrylic resins of a highly pearlescent nature that gives it a high quality metallic appearance with a glossy and uniform finish.

Suitable for multiple indoor and outdoor uses such as decoration and protection - automobiles, bicycles, decorative objects etc.

Suitable various surfaces: wood, metal, stainless steel, glass, wicker, plaster, ceramic, stone, hard plastic.

Features

- Very fast drying
- Good elasticity
- Easy to apply and recoat
- Excellent adhesion
- Does not contain lead
- Good covering capability
- Excellent gloss finish even without varnishing
- Very good resistance to the sun and rain
- Perfect results both indoor or outdoors
- Can be varnished

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Universal primer and paint for all types of difficult surfaces.

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

The MTN PRO Bathtub and Tile Paint is a white satin spray paint developed with modified epoxy resins. It is an ideal choice for touching-up or repainting bathtubs, sinks and tiles in one product.

Its excellent adherence and resistance to very humid environments make this product the best option for renovating bathrooms and kitchens, and can also be applied to any porcelain or ceramic surface with optimal results.

The product is only available in white and can be recoated with varnish or paint to modify the colour or level of gloss.

 - Good adhesion to ceramic and porcelain

 - Strong resistance in humid environments

 - Resistant to UV rays

 - Easy to apply

 - Satin white colour

 - Can be painted over with other paints and varnishes

INSTRUCTIONS FOR USE

Shake the can very well before use, for about a minute after hearing the noise of the mixing ball

Apply to clean and dry surfaces, removing mould, grease, soap residue and any other kind of dirt. Prepare the surface with an scrubbing sponge and bathroom cleaning solution to create a slightly porous surface for better adhesion. Clean the entire surface once again and rinse with water. Sand the whole surface with P400 or P600 grit wet / dry sandpaper. Clean and dry before painting.

Apply the product from a distance of 15-20 cm. Apply in thin layers to avoid paint build up. Three thin coats are always better than one thick layer. Always test product on a small area before painting.

The surface can be painted again with the same product after 30-60 minutes. You can apply other products after 24 hours. After 72 hours you can use the bathtub normally.

Once the application is finished, invert the aerosol and purge the valve after use. If the nozzle clogs, replace it with a new one.

Do not apply to equipment connected to the mains and use in well ventilated areas.

• 400ml can

SDS (Safety Data Sheet): Request SDS

The MTN PRO Glass to Mirror Converter is a decorative paint especially suitable for turning any glass into a mirror. The product should be applied on the opposite side of the surface to be converted.

CHARACTERISTICS

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

MTN PRO Grey filler Primer is a one-component filler spray paint, manufactured with modified synthetic nitro resins which permit excellent repainting. Specially developed for professional use.

• Light grey colour
• Quick drying
• Great filling properties
• Easy to sand
• Contains no lead or other heavy metals
• Easy to apply and repaint
• 400ml can

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Anchor primer formulated with a base solution consisting of special additives that provide extraordinary adherence for final paint coats on EPDM-modified PP (Polypropylene) and other plastics. Its adhesive power in various surfaces makes it ideal as an anchor layer for plastic and metal surfaces.

 • Colourless • Very fast drying

 • Good elasticity

 • Easy to apply and recoat

• Excellent adhesion on polypropylene (EPDM modified), on other plastics it is recommended to perform a test before use

 • 400ml can

SDS (Safety Data Sheet): Request SDS

Technical Data Sheet: Download Technical Sheet (pdf)