The MTN SprayHandle is a gun that facilitates the use of the spray can. It adapts to all types of MTN spray cans, providing comfort and avoiding finger fatigue. In addition, it keeps the product from making contact with your hands, avoiding stains on your body and clothes.

FEATURES

• Easy to set up and use

• Yellow and black

• Suitable for virtually all MTN spray cans

• Ergonomic shape

• Made of recyclable plastic USAGE The SprayHandle is the equivalent to handling a spray paint gun, so its use extends to:

• The painting and varnishing of objects in general

• The application of aerosol products on large surfaces where thin coats are required

INSTRUCTIONS FOR USE

• Attach the SprayHandle holder to the neck of the spray can by pushing horizontally

• Warning: do not apply force at an angle as the holder may break • Before use, pull the trigger so that the aerosol lets out a little gas

• Pull the trigger with four fingers to save force

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The Fat Cap gold/black is wide fat cap, for average spray width from 20cm (7.87“). The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

For those of you that have pressing down nozzles on cans for a long time, you may remember the Fat Cap GOLD/BLACK as the old Level 5 fat cap in the original Montana Cans Level cap system. Montana Cans developed the fat cap GOLD/BLACK as the widest spraying cap for specific graffiti use. At the time we thought we had invented the wheel.

After we developed the new Level 6 cap for the current Montana GOLD Level cap system, we thought we had re-invented the "fat cap" wheel again.

But with its massive, beautifully clean round lines (considering its spray width), and its ability to create the largest spray output on the Montana BLACK can series, the fat cap GOLD/BLACK was lovingly brought back into our assortment by popular demand from the international graffiti community.

With the Level 6 fat cap as well, our fat cap assortment extended for lovers of fat line work and fast application. 

With an impressive average spray width of 20cm, the GOLD/BLACK fat cap fits on any female valve cans like the Montana BLACK and Montana GOLD. The spray width changes subject to the distance used from the substrate. For wide lines, spray from a closer distance. For even wider lines, spray from a further distance to the substrate.

Please note, due to higher paint output, using Fat Caps may result in dripping or excessive paint application in some contexts.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

• Same spray as the Gold stock cap that comes on Montana Gold Cans

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 6 Cap is classed as an Ultra Wide Fat Cap and offers the largest spray output for the Montana GOLD low pressure cans. Clearly a fat cap, the Level 6 cap sprays lines of 5cm to 25cm on average. The Level 6 cap can achieve the largest spray output in the fastest possible time over large surface areas.

The ultimate fill in cap for graffiti, street art and urban art, the Level 6 cap applies colour with moderate to spray mist subject to wind conditions. The Level 6 cap fits female valve cans and can also be used with great results on the Montana BLACK and Montana WHITE can ranges. D.I.Y and arts and crafts project makers need to be aware that this cap is only for larger surface areas only. Applying to small projects will result in excessive paint application or drips.

Often turned to by graffiti artists as the fastest filling cap for artworks that need to be completed in a short period of time, the LEVEL 6 caps is the king of fat caps. The spray width changes as the distance of application to the substrate changes. For fatter or broader lines, spray from a further distance. Please note, due to higher paint output, using Fat Caps may result in dripping or excessive paint application in some contexts.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The Level 4 Cap is a soft fat cap, for a average spray width from 3 -10cm (1.2“ to 4“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 4 Cap is classed as a Soft Fat Cap and is a clear step away in spray width from the skinny cap series. Moving from middle to larger sized spray widths, the Level 4 cap sprays lines of 3cm to 10cm on average. The Level 4 cap is developed for the Montana GOLD range to achieve soft, smooth and fat paint application. The Level 4 cap specialises in fading paint to achieve the ultimate colour gradients while being applied from moderate to large surface areas with less time.

Often used in graffiti, street art and urban art to fade one or more colour into another(s), the Level 4 cap can blend the colour with moderate spray mist, to make it difficult to see where one colour was applied over the other on large surface areas. The Level 4 cap fits female valve cans and can also be used with great results on the Montana BLACK and WHITE can ranges. D.I.Y and arts and crafts project makers need to be aware that this is for larger surface areas only. Applying to small projects may result in excessive paint application or drips.

The Level 4 cap can be used in many contexts, but its strengths lie in is use to cover larger surface areas in a shorter time period. Often used by graffiti artists as a filling cap for artworks that need to be completed in a short period of time. The spray width changes as the distance of application to the substrate changes. For fatter or broader lines, spray from a further distance.

• Spray Width: Medium

• Spray Shape: Round

• Male cap

• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake, Kobra and others

The Level 3 Cap is a soft skinny cap, for medium average spray width from 1 - 4cm (0.4“ to 1.6“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 3 Cap is classed as a Soft Skinny Cap and brings on the change from smaller to a middle sized line. The Level 3 cap is developed for the Montana GOLD range to achieve soft, smooth paint application. Although not as clean as the Level 1 and Level 2 caps before it, the Level 3 cap specialises in fading paint to achieve the ultimate colour gradients on small to moderate surface areas.

Often used in graffiti, street art and urban art to fade one or more colour into another(s), the Level 3 cap can blend colour with fine spray mist to make it difficult to see where one colour was applied over the other. The Level 3 cap is for female valve cans and also delivers excellent, accurate results on the Montana BLACK and WHITE can ranges, making it perfectly suited for D.I.Y and arts and crafts projects.

The Level 3 cap can be used in many contexts, but its strengths lie in is use to cover middle to larger surface areas. If you are using it in the context of art and craft or D.I.Y projects, the Level 3 can be ideal for objects that start to become a little larger in size, or when parts can be coloured separately and then applied to the main object later. The spray width changes as the distance of application to the substrate changes. For skinnier lines, spray from a closer distance to your substrate. For fatter or broader lines, spray from a further distance. Applying paint closer to a small object may result in drips.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The Level 2 Cap is fine skinny cap, for a fine average spray width from 0.6 - 2.5cm (0.25“ to 1“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 2 Cap is the next step up in size from the Level 1 cap. Classed as a Fine Skinny cap, the Level 2 cap was developed for the low pressure Montana GOLD line to offer a clean skinny spray line that ranges in average from 0.6cm, to 2.5cm in size. The Level 2 cap is widely used as an outline cap for graffiti, street art and urban art. Able to be perform thin, clean lines and also for filling and fading over moderate surface areas, it delivers excellent results that are accurate. The Level 2 can be used on female valve cans, including Montana BLACK and WHITE can ranges. If your working on D.I.Y and arts and crafts projects, the Level 2 will allow you to work cleaning on small surfaces and can be applied with minimal to no sign of spray stroke.

The Level 2 cap can be used in almost any context. As well as outlining, the Level 2 Cap is often used by artists working on close up details as in portraiture, figurative or realism. Craft and craft projects can receive soft, smooth application and seamless colour gradients. It is optimal for when colours need to be precisely layered next to each other. The spray width changes as the distance of application to the substrate changes. For skinnier lines, spray from a closer distance to your substrate. For fatter or broader lines, spray from a further distance.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

Now cleaner and thinner than before! The Level 1 Cap is a ultra skinny cap, for a extra fine average spray width ranging from 0.4 -1.5cm (0.15“ to 0.6“). The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 1 Cap is the ultimate precision cap for the Montana GOLD and is the preferred outline cap for graffiti, street artists and urban artists. It also delivers excellent, accurate results on the Montana BLACK and WHITE can ranges, making it perfectly suited for D.I.Y and arts and crafts projects. Developed specifically for the Montana GOLD range, the Level 1 Cap was re-launched with even skinnier and cleaner results.

The Level 1 Cap offers ultra skinny lines that are ideal for fine work, when extreme detail is required (as in Graffiti/Street/Urban art), or when working on small projects. The Level 1 Cap has an average spray width of 0.4cm -1.5cm. Although able to be used in almost any context, the Level 1 Cap is often used by artists in the context of outlining their works, working on extreme close up details as in portraiture, figurative or realism. It is optimal for when colours need to be precisely layered next to each other, or when paint needs to be applied with as little sign of spray stroke as possible. The spray width changes as the distance of application to the substrate changes. For skinnier lines, spray from a closer distance to your substrate. For fatter or broader lines, spray from a further distance.