Shop by Nozzle Type
• Spray Width: Fine
• Spray Shape: Round
• Male cap
• Same cap that comes standard on a MTN Hardcore can
• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake, Kobra and others
Spray Width: Fine
Spray Shape: Round
• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake and others
Spray Width: Fine/Round
• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake and others
Other Names: Super Skinny Cap
Staff Tip: Soft caps and great for fades, use this cap for smaller sized fades
• Spray Width: Fine
• Spray Shape: Round
• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake, Kobra and others
Now cleaner and thinner than before! The Level 1 Cap is a ultra skinny cap, for a extra fine average spray width ranging from 0.4 -1.5cm (0.15“ to 0.6“). The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.
The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 1 Cap is the ultimate precision cap for the Montana GOLD and is the preferred outline cap for graffiti, street artists and urban artists. It also delivers excellent, accurate results on the Montana BLACK and WHITE can ranges, making it perfectly suited for D.I.Y and arts and crafts projects. Developed specifically for the Montana GOLD range, the Level 1 Cap was re-launched with even skinnier and cleaner results.
The Level 1 Cap offers ultra skinny lines that are ideal for fine work, when extreme detail is required (as in Graffiti/Street/Urban art), or when working on small projects. The Level 1 Cap has an average spray width of 0.4cm -1.5cm. Although able to be used in almost any context, the Level 1 Cap is often used by artists in the context of outlining their works, working on extreme close up details as in portraiture, figurative or realism. It is optimal for when colours need to be precisely layered next to each other, or when paint needs to be applied with as little sign of spray stroke as possible. The spray width changes as the distance of application to the substrate changes. For skinnier lines, spray from a closer distance to your substrate. For fatter or broader lines, spray from a further distance.
• Spray Width: Fine
• Spray Shape: Round
• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Flame, Molotow, Loop, OneTake, Kobra and others
The Level 2 Cap is fine skinny cap, for a fine average spray width from 0.6 - 2.5cm (0.25“ to 1“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.
The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 2 Cap is the next step up in size from the Level 1 cap. Classed as a Fine Skinny cap, the Level 2 cap was developed for the low pressure Montana GOLD line to offer a clean skinny spray line that ranges in average from 0.6cm, to 2.5cm in size. The Level 2 cap is widely used as an outline cap for graffiti, street art and urban art. Able to be perform thin, clean lines and also for filling and fading over moderate surface areas, it delivers excellent results that are accurate. The Level 2 can be used on female valve cans, including Montana BLACK and WHITE can ranges. If your working on D.I.Y and arts and crafts projects, the Level 2 will allow you to work cleaning on small surfaces and can be applied with minimal to no sign of spray stroke.
The Level 2 cap can be used in almost any context. As well as outlining, the Level 2 Cap is often used by artists working on close up details as in portraiture, figurative or realism. Craft and craft projects can receive soft, smooth application and seamless colour gradients. It is optimal for when colours need to be precisely layered next to each other. The spray width changes as the distance of application to the substrate changes. For skinnier lines, spray from a closer distance to your substrate. For fatter or broader lines, spray from a further distance.
The OG Stencil Cap™ by SWANK ONE
Pioneered by West Coast graffiti writers, the original OG Stencil Cap is the first and finest line cap adapter made for today's serious aerosol artist. The OG Stencil Cap is the first professional iteration of this adapter developed for manufacturing by writer SWANK ONE, this game-changing tool gives you the power to spray incredibly thin, precise lines and achieve the finest details like never before.
Stencil Caps are used to create ultra fine lines. Attach them over your regular skinny nozzle and the small hole will only let a small amount of the paint through, creating super fine lines on your artwork. Keep them clean and you can reuse for years.
• Available with hole size 1mm, 2mm and 3mm
• Precision-cut venting for consistent spray flow
• Easy to clean / solvent resistant
• Designed for repeat use in professional production work
• Made in USA
• Achieve incredible details with 2mm / 0.08" thin lines!
• Built-in 45ml / 1.52fl.oz. reservoir
• Fits on every spraycan!
• Work on minimum space!
• Easy to use!
• Easy to clean!
• No mess anymore!
• Patented!
• Don't wait to level-up your art!
How should I use my TINYPINK?
Shake your spray can very well before you attach the TINYPINK stencil cap! Best to use it with a standard or original cap (black/white) or a skinny cap! Then just click the TINYPINK on the big fold on the upper end of your spray can! Finally, press down the cap! If no paint comes through the whole turn your cap slightly to the right or left.
Don't shake the can while there is paint in the TINYPINK's reservoir! Paint will splatter! If you can't avoid shaking it, you can try putting a piece of cloth in the reservoir! This will be like a sponge and will prevent the paint running out. Of course you have to replace the cloth with a new one from time to time!
Empty the reservoir regularly!
Which cap should I use together with the TINYPINK stencil cap?
We recommend standard or original cap (black/white). Also (ultra) skinny caps work fine! With fat caps you will waste far more paint.
You can also try needle caps! These will provide much more saturated lines in combination with the TINYPINK stencil cap but with no splatters like you know it from junkie caps!
TINYPINK stencil cap - needle cap
How can I achieve 3mm / 0.12“ to 5mm / 0.20“ thick lines?
Just widen the hole with a 3mm / 0.12“ to 5mm / 0.20“ drill according to your preferences!
TINYPINK stencil cap - drill TINYPINK stencil cap - 3-5mm drill
The TINYPINK doesn‘t work! No paint comes through the hole!
The reason is mostly because the spray pattern of a cap is more like a ring (no filled centre) and not like a dot. So please try to turn the cap a little bit to the left or right so that the "ring" hits the hole!
Or try a needle cap! This should work for sure and you will get more saturated lines as with skinny caps!
TINYPINK stencil cap - turn cap TINYPINK stencil cap - needle cap
The hole clogs very quickly!
The TINYPINK comes with a 2mm / 0.08“ hole to achieve 2mm / 0.08“ thin lines! If it clogs to fast please stick the included nail through it to open it again.
We also recommend to use acetone spray (Montana Cans Cap Cleaner, Loop Acetone Spray, MTN, etc.) with a needle cap to blast residual paint out of the hole!
Another option is to widen the whole with a 3mm / 0.12“ to 5mm / 0.20“ drill! Just customise your TINYPINK to your preferences. The wider the whole, the thicker the lines, the less likely it will clog.
TINYPINK stencil cap - nail TINYPINK stencil cap - acetone spray
How long will the TINYPINK last?
It's like with all things in life: the better you treat your stencil cap the longer it will last!
Clean your TINYPINK properly! Please have a look at section „How should I clean it?“ to learn about the right maintenance!
How should I empty the reservoir?
simply turn it upside down and let the paint run out at one corner.
Don't take off the plug to empty the reservoir or you will have a big mess! Remove it only for cleaning purposes after the reservoir was emptied!
TINYPINK stencil cap - empty reservoir
Why doesn't the paint run into the reservoir but down the outside of the stencil cap?
There is a slit right under the hole. Make sure it isn't clogged with paint! Open it with the included nail or acetone!
My plug shrinked! / My plug doesn't fit into the reservoir anymore!
The most common reason is that the plug has had paint on it for too long or it has been soaked in acetone for too long.
You should also not leave the TINYPINK in the blazing sun for too long at temperatures above 40°C / 100°F! This can cause the material to soften and shrink! If your plug is no longer tight, simply secure it with a piece of tape!
How to clean the TINYPINK at the end of a day?
If your TINYPINK has a lot of dried paint on it you can put it in an acetone bath. Take a screw-top jar, put (only!) the pink part of your stencil cap inside with some acetone, close it with a lid, and shake it. Let it rest there for an hour. Repeate shaking is recommend! Take the TINYPINK out and scrub off the paint which wasn't dissolved with a toothbrush or similar.
Like said before, never let the black plug rest in an acetone bath! It can be damaged because the solvent in the paint can react with the rubber. Just wipe of the paint with a cloth dunked in acetone or use an acetone spray!
What’s in the Box set:
2 x Slim Darts ( Krypto Green extended nozzle ) Skinny cap
1 x Heavy Dart ( Aqua extended nozzle ) Fat cap
2 x Slim Spigots ( Black detachable stem ) Low output
1 x Heavy Spigot ( Infra Red detachable stem ) High output
1 x Flat Liner ( Brush Head with Sheath) Medium round profile
1 x Fine Liner ( Brush Head with Sheath ) Tapered thin
‘DART’ FEATURES ( Nozzle )
*EXTENDED PROFILE - Get closer to the surface.
*ULTRA FINE LINES - Slim Dart mixed with Slim Spigot is capable of stencil sized lines on low pressure cans.
*FITS ALL - Use your favorite female cans, plus male valves with both 3.18mm & 4mm spigots.
*STAY CLEAN - Our nozzles will pull the accumulating drip from the tip of the nozzle and draw it into the
custom well to keep your work clean from splatter.
*SLIM & HEAVY SPIGOTS - Customize the spray output with our custom spigots for varied line thicknesses.
‘BRUSH HEAD’ FEATURES
*CLICK ON BRUSH HEAD - Brush finer details with the spray paint colour already in hand.
*LINE VALUE - Choose from a fine tapered line or medium flat round line value.
*EASY TO CLEAN - Soak in water, acetone or. solvent for a quick clean. You can attach
SPRAYBRUSH to a solvent spray can and stay clean out in the field.
*TAPERED BRISTLES - Don’t compromise with the finished look of your artwork. Each bristle has a long taper for a smooth finish.
Showing 16/16
Recently Viewed
- Choosing a selection results in a full page refresh.
- Opens in a new window.