To carry out this project we recommend the use of
- MTN PRO White Base Primer
- MTN 94
- MTN PRO Acrylic Varnish or MTN PRO 2k Varnish, if you are looking for a more resistant finish
- 0:24 Spray the board with water and sand it with fine sand paper
- 0:37 Before painting, make sure it’s dry and clean
- 0:44 Apply the MTN PRO White Base Primer. Shake can well during 1 minute. Paint holding the cans as vertically as possible. Apply three or four thin layers rather than a thick one and make sure to cover the whole board.
- 1:09 Let the Paint dry for about 20 minute.
- 1:12 Tape off areas to be painted
- 1:20 Shake spray Paint well and apply to the board. Apply three or four thin layers rather than a thick one and make sure to cover the whole board.
- 1:34 If using several colors, let the Paint dry for a least 15 minutes.
- 1:51 Don’t let the Paint dry for more than 60 minutes before varnishing or wait for 6 days.
- 1:59 Shake the varnish well during 1 minute before use it and apply three or four thin layers rather than a thick one and make sure to cover the whole board. Let the varnish dry for 15 minutes between layer
- 2:09 After 24 hours, the varnish will be completely dry and you will be able to enjoy the best waves