*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

The MTN PRO Bathtub and Tile Paint is a white satin spray paint developed with modified epoxy resins. It is an ideal choice for touching-up or repainting bathtubs, sinks and tiles in one product.

Its excellent adherence and resistance to very humid environments make this product the best option for renovating bathrooms and kitchens, and can also be applied to any porcelain or ceramic surface with optimal results.

The product is only available in white and can be recoated with varnish or paint to modify the colour or level of gloss.

 - Good adhesion to ceramic and porcelain

 - Strong resistance in humid environments

 - Resistant to UV rays

 - Easy to apply

 - Satin white colour

 - Can be painted over with other paints and varnishes

INSTRUCTIONS FOR USE

Shake the can very well before use, for about a minute after hearing the noise of the mixing ball

Apply to clean and dry surfaces, removing mould, grease, soap residue and any other kind of dirt. Prepare the surface with an scrubbing sponge and bathroom cleaning solution to create a slightly porous surface for better adhesion. Clean the entire surface once again and rinse with water. Sand the whole surface with P400 or P600 grit wet / dry sandpaper. Clean and dry before painting.

Apply the product from a distance of 15-20 cm. Apply in thin layers to avoid paint build up. Three thin coats are always better than one thick layer. Always test product on a small area before painting.

The surface can be painted again with the same product after 30-60 minutes. You can apply other products after 24 hours. After 72 hours you can use the bathtub normally.

Once the application is finished, invert the aerosol and purge the valve after use. If the nozzle clogs, replace it with a new one.

Do not apply to equipment connected to the mains and use in well ventilated areas.

• 400ml can

SDS (Safety Data Sheet): Request SDS

* This product has changed names from 'Metal Effects' to 'Chrome Effects', some cans may still have the old name on the can but is the same product

MTN PRO Chrome Effects Paint is a spray paint that is suitable for all types of surfaces which you would like to give a chrome or metallic effect. Its finish provides a strong aesthetic impact and is suitable for craft, artistic and decorative work.

Product Characteristics

This is a paint that mimics metals with a chrome finish. This is achieved by with a leafing effect.

Leafing pigments work by floating in the paint film and are oriented horizontally to its surface. Thanks to this formula, they create the impression of a chromed surface with high reflection.

This nature of the paint means that it is not suitable for outdoor use or in circumstances where the painted object will be touched, since the effect will disappear.

For the same reason, it cannot be varnished. If you do so, it will lose its chrome effect and you will end up with a matt metallic paint finish.

Therefore, this paint is to be used indoors exclusively for decorative use.

If you require a metallic that can be touched we would recommend the WEPRO Metallic range.

MTN PRO Antioxidant Primer spray is formulated with acrylic resins and corrosion inhibiting pigments (modified zinc phosphate). Its anticorrosive properties makes it ideal for protecting any ferrous surface.

• Quick drying
• Good elasticity
• Easy to apply and repaint
• Excellent surface adhesion
• Does not contain lead
• High coverage
• High weather resistance
• Excellent anticorrosive power
• Grey colour
• 400ml

The MTN PRO Paint Stripper / Remover effortlessly eliminates and cleans any type of wet or dry paint and varnish. Can be applied to different surfaces: wood, metal, stone, cement, etc. Suitable for DIY and industrial uses.

 • Good smell • Easy to apply

 • Chlorides free

 • For systems 1k (won't work effectively on 2k paints)

 • 400ml can

SDS (Safety Data Sheet): Request SDS

Technical Data Sheet: Technical Sheet (.pdf)

Related Videos

• HOW TO STRIP the paint off a stool with MTN PRO Paint Stripper

• HOW TO TRANSFORM a garden table and chairs

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Anchor primer formulated with a base solution consisting of special additives that provide extraordinary adherence for final paint coats on EPDM-modified PP (Polypropylene) and other plastics. Its adhesive power in various surfaces makes it ideal as an anchor layer for plastic and metal surfaces.

 • Colourless • Very fast drying

 • Good elasticity

 • Easy to apply and recoat

• Excellent adhesion on polypropylene (EPDM modified), on other plastics it is recommended to perform a test before use

 • 400ml can

SDS (Safety Data Sheet): Request SDS

Technical Data Sheet: Download Technical Sheet (pdf)

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Phosphate primer, suitable for metallic surfaces.

WEPRO Etch Primer (formerly MTN PRO Wash Primer) is a spray paint that contains a product that is suitable as a phosphate primer coat. It is specifically designed for metallic surfaces (galvanized and electro-galvanized steel, aluminum and other polished metals).

It provides excellent adherence to any base on which paint will be applied. Especially suitable for use on garage doors, metal shutters, aluminium framing and copper pipes.

Ideal as a base coat before using any other type of paint. It provides durability and prevents the paint from cracking or peeling and can also be used as a primer for polyamide, carbon fibre, epoxy, polyester, acrylate, PVC, PC and ABS plastic surfaces.

- Good adhesion
- Corrosion protection
- Fast drying (10 min)
- Repaintable with another product after 2 hours
- On old paints, clean the surface well after sanding
- Does not contain lead

SDS (Safety Data Sheet): Request SDS 

Technical Data Sheet: TDS (.pdf)

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Universal primer and paint for all types of difficult surfaces.

*MTN PRO is changing, welcome WEPRO! As stock is rebranded a mix of packaging may be supplied. Rest assured, it’s the same product and quality inside.

Product developed for preparing, sealing, priming and improving colour adhesion to most surfaces.

 • Fast drying

• Excellent flexibility

 • Easy to apply and repaint

 • Excellent adherence

 • Does not contain lead

 • High opacity

 • 400ml can