• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The Level 4 Cap is a soft fat cap, for a average spray width from 3 -10cm (1.2“ to 4“).The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 4 Cap is classed as a Soft Fat Cap and is a clear step away in spray width from the skinny cap series. Moving from middle to larger sized spray widths, the Level 4 cap sprays lines of 3cm to 10cm on average. The Level 4 cap is developed for the Montana GOLD range to achieve soft, smooth and fat paint application. The Level 4 cap specialises in fading paint to achieve the ultimate colour gradients while being applied from moderate to large surface areas with less time.

Often used in graffiti, street art and urban art to fade one or more colour into another(s), the Level 4 cap can blend the colour with moderate spray mist, to make it difficult to see where one colour was applied over the other on large surface areas. The Level 4 cap fits female valve cans and can also be used with great results on the Montana BLACK and WHITE can ranges. D.I.Y and arts and crafts project makers need to be aware that this is for larger surface areas only. Applying to small projects may result in excessive paint application or drips.

The Level 4 cap can be used in many contexts, but its strengths lie in is use to cover larger surface areas in a shorter time period. Often used by graffiti artists as a filling cap for artworks that need to be completed in a short period of time. The spray width changes as the distance of application to the substrate changes. For fatter or broader lines, spray from a further distance.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 5 Cap is classed as a Wide Fat Cap and a clear step into the fat cap series. Focusing on the larger sized spray widths, the Level 5 cap sprays lines of 4cm to 15cm on average. The Level 5 cap is developed for the Montana GOLD range to achieve firm, smooth and fat paint application. The Level 5 cap specialises in not only filling in paint over greater surface area with the least amount of time, it can also be applied the application of clean line work on large-scale works.

The Level 5 cap can blend colour with moderate spray mist, making it difficult to see where one colour was applied over the other on large surface areas. The Level 5 cap fits female valve cans and can also be used with great results on the Montana BLACK, Montana CHALK and Montana WHITE can ranges. D.I.Y and arts and crafts project makers need to be aware that this is for larger surface areas only. Applying to small projects may result in excessive paint application or drips.

The Level 5 cap can be used in many contexts, but its strengths lie in is use to cover larger surface areas in a shorter time period or outlining large works. The spray width changes as the distance of application to the substrate changes. For fatter or broader lines, spray from a further distance. Please note, due to higher paint output, using Fat Caps may result in dripping or excessive paint application in some contexts.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The complete Level Cap system was developed by Montana Cans to compliment the exceptional characteristics of the low pressure, Montana GOLD. The Level 6 Cap is classed as an Ultra Wide Fat Cap and offers the largest spray output for the Montana GOLD low pressure cans. Clearly a fat cap, the Level 6 cap sprays lines of 5cm to 25cm on average. The Level 6 cap can achieve the largest spray output in the fastest possible time over large surface areas.

The ultimate fill in cap for graffiti, street art and urban art, the Level 6 cap applies colour with moderate to spray mist subject to wind conditions. The Level 6 cap fits female valve cans and can also be used with great results on the Montana BLACK and Montana WHITE can ranges. D.I.Y and arts and crafts project makers need to be aware that this cap is only for larger surface areas only. Applying to small projects will result in excessive paint application or drips.

Often turned to by graffiti artists as the fastest filling cap for artworks that need to be completed in a short period of time, the LEVEL 6 caps is the king of fat caps. The spray width changes as the distance of application to the substrate changes. For fatter or broader lines, spray from a further distance. Please note, due to higher paint output, using Fat Caps may result in dripping or excessive paint application in some contexts.

• Male cap
• Works on most female valved cans including MTN, Ironlak, Montana, Loop and others

The Fat Cap gold/black is wide fat cap, for average spray width from 20cm (7.87“). The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

For those of you that have pressing down nozzles on cans for a long time, you may remember the Fat Cap GOLD/BLACK as the old Level 5 fat cap in the original Montana Cans Level cap system. Montana Cans developed the fat cap GOLD/BLACK as the widest spraying cap for specific graffiti use. At the time we thought we had invented the wheel.

After we developed the new Level 6 cap for the current Montana GOLD Level cap system, we thought we had re-invented the "fat cap" wheel again.

But with its massive, beautifully clean round lines (considering its spray width), and its ability to create the largest spray output on the Montana BLACK can series, the fat cap GOLD/BLACK was lovingly brought back into our assortment by popular demand from the international graffiti community.

With the Level 6 fat cap as well, our fat cap assortment extended for lovers of fat line work and fast application. 

With an impressive average spray width of 20cm, the GOLD/BLACK fat cap fits on any female valve cans like the Montana BLACK and Montana GOLD. The spray width changes subject to the distance used from the substrate. For wide lines, spray from a closer distance. For even wider lines, spray from a further distance to the substrate.

Please note, due to higher paint output, using Fat Caps may result in dripping or excessive paint application in some contexts.

Montana Needle Fine Liner

The NEEDLE FINE LINER (Purple) is the little sibling of the original Needle Cap. Its average spray width is 2mm-10mm (0,08" to 0,39") making it a finer version. It achieves sketchy rough lines that are ideal for highlights, small details or rendering. The spray width changes with the used distance to the object. For skinnier lines, spray from a closer distance. For fatter lines, spray from a further distance.

The NEEDLE CAP series earn their names due to there unique appearance. Unlike the dots that designate the spray trajectory in standard caps, the needle cap has a hollow plastic tube extruding from its round body form, that offers a paint trajectory in squirting output as if the paint was being sprayed through a needle. With an average spray width of 2mm to 10mm, the line the NEEDLE FINE LINER (Purple) produces is similar to the STANDARD Cap with its dirty and raw characteristics.

Often used by street artists, urban artists and studio artists to achieve splatter like application on small scales, the needle cap fits on all-female valve caps like Montana GOLD, Montana BLACK and Montana WHITE. The spray width changes subject to the distance it is used from the object being coated. For skinnier lines, spray from a closer distance. For wider lines, spray from a further distance. For greater splatter effects, withdraw pressure on the cap to half triggering. Best results are achieved with Montana GOLD cans.

The MTN SprayHandle is a gun that facilitates the use of the spray can. It adapts to all types of MTN spray cans, providing comfort and avoiding finger fatigue. In addition, it keeps the product from making contact with your hands, avoiding stains on your body and clothes.

FEATURES

• Easy to set up and use

• Yellow and black

• Suitable for virtually all MTN spray cans

• Ergonomic shape

• Made of recyclable plastic USAGE The SprayHandle is the equivalent to handling a spray paint gun, so its use extends to:

• The painting and varnishing of objects in general

• The application of aerosol products on large surfaces where thin coats are required

INSTRUCTIONS FOR USE

• Attach the SprayHandle holder to the neck of the spray can by pushing horizontally

• Warning: do not apply force at an angle as the holder may break • Before use, pull the trigger so that the aerosol lets out a little gas

• Pull the trigger with four fingers to save force

What’s in the Box set:

2 x Slim Darts ( Krypto Green extended nozzle ) Skinny cap

1 x Heavy Dart ( Aqua extended nozzle ) Fat cap

2 x Slim Spigots ( Black detachable stem ) Low output

1 x Heavy Spigot ( Infra Red detachable stem ) High output

1 x Flat Liner ( Brush Head with Sheath) Medium round profile

1 x Fine Liner ( Brush Head with Sheath ) Tapered thin

‘DART’ FEATURES ( Nozzle )

*EXTENDED PROFILE - Get closer to the surface.

*ULTRA FINE LINES - Slim Dart mixed with Slim Spigot is capable of stencil sized lines on low pressure cans.

*FITS ALL - Use your favorite female cans, plus male valves with both 3.18mm & 4mm spigots.

*STAY CLEAN - Our nozzles will pull the accumulating drip from the tip of the nozzle and draw it into the

custom well to keep your work clean from splatter.

*SLIM & HEAVY SPIGOTS - Customize the spray output with our custom spigots for varied line thicknesses.

‘BRUSH HEAD’ FEATURES

*CLICK ON BRUSH HEAD - Brush finer details with the spray paint colour already in hand.

*LINE VALUE - Choose from a fine tapered line or medium flat round line value.

*EASY TO CLEAN - Soak in water, acetone or. solvent for a quick clean. You can attach

SPRAYBRUSH to a solvent spray can and stay clean out in the field.

*TAPERED BRISTLES - Don’t compromise with the finished look of your artwork. Each bristle has a long taper for a smooth finish.