Angelus acrylic leather paint is the highest quality paint for sneaker customisations.Angelus Leather Acrylic Paint will not crack or peel when prepped and applied properly.Angelus Leather Paint is water-based for easy clean-up and is mixable for countless custom colours!

Once applied with enough coats, these metallic paints will give off a nice metallic sheen. Applying a base coat of a light colour (such as white) is recommended when working on darker surfaces.

Looking for the Jordan DMP Gold colour? Mix the Gold colour from this range with a tiny bit of Flat Black paint to replicate the DMP colour.

Directions for Use
Prepare smooth leather surfaces using Angelus Preper and Deglazer. When dry, wipe with a microfibre cloth to remove any remaining dust particles.Apply paint with a fine brush or sponge. Angelus paint may be applied with an airbrush using a 0.3533 needle or larger without thinning. If airbrush needle in smaller than 0.35mm or thinner paint is desired, mix Angelus Paint with Angelus 2-Thin. Allow to dry for at least 24 hours before allowing paint to bend or flex. If a lower shine is desired mix paint with Angelus Duller. For a different sheen, use an Angelus Acrylic Finisher of your choosing.

Also works on Canvas, Denim, Faux Leather, Mesh, Nylon, Wood and much more.An applicator brush is attached to the inside lid of bottle.

Clean up with water.

Many thin coats and better than one thick coat.

For more tips and tricks visit YouTube.com/AngelusBrand

Made in USA since 1907.

Angelus 2-Hard promotes adhesion and film hardness.

Directions: Mix with Angelus Acrylic Paints: 50% 2-Hard for flexible surfaces, 75% 2-Hard for rigid surfaces.

Apply multiple thin coats until you obtain full and even coverage.

Allow to dry for 48 hours.

After using Angelus Leather Acrylic Paint, apply Angelus Acrylic Finisher to your projects to help protect the paint from minor scratches/scrapes.

• Matte top finish for use on all smooth leathers
• Apply with a sponge, rag, wool, spray gun, or brush and let dry
• No buffing needed
• Water-based product cleans up with soap and water
• Water resistant

• Quick drying
• Will not rub off, crack, peel, or streak
• Great when used over different finishes where a uniform finish is desired
• Flexible enough for belts, shoes, handbags, saddlery/tack, and upholstery

Refilling made easy:

The BURNER™ REFILL in 200 ml enables a clean, easy refill of the BURNER™ DRIPSTICK.

The alcohol-based dripstick-optimized BURNER™ ink has a high-gloss, reflective effect and is particularly suitable for smooth, non-absorbent surfaces.

This liquid chrome paint can also be used in a variety of other paint pens, bingo dabbers or applied with brush or airbrush.

• Alcohol based
• High coverage
• Reflective
• Chrome ink with high gloss effect
• For almost all non-absorbent surfaces
• 200 ml bottle

After using Angelus Leather Acrylic Paint, apply Angelus Acrylic Finisher 600 to your customised sneakers to help protect the paint from minor scratches/scrapes.

Acrylic Finisher No 600 has a gloss finish.

• Semi to high gloss top finish for use on all smooth leathers
• Apply with a sponge, rag, wool, spray gun, or brush and let dry
• No buffing needed
• Water-based product cleans up with soap and water
• Water resistant
• Will not rub off, crack, peel, or streak
• Great when used over different finishes where a uniform finish is desired
• Flexible enough for belts, shoes, handbags, saddlery/tack, and upholstery

When heat-set properly, this Fabric Medium will help keep your fabrics nice and soft after being painted.

Directions: Mix Angelus 2-Soft with Angelus Acrylic Paints in a 1:1 ratio.

Apply multiple coats until you obtain full and even coverage.

Allow paint to completely dry.

Heat-set using a heatgun at 300º F for 3-5 minutes (this step is REQUIRED).

Warning: This product contains Formaldehyde, a chemical known to the State of California to cause cancer.

Use with proper ventilation.