Perfect to use with our Riso Screens.

Blade length 15cm.

iDye Poly is for synthetic fibres such as polyester and nylon. It will colour almost anything synthetic, including plastics and acrylics, buttons, frisbee discs, shoes, 3D printed objects, toys, dolls, wigs, urethane coatings and more!

The dye comes in a dissolvable packet, so there are never any messy powders to handle: simply drop the packet in a pot of water, add your fabric or objects and bring to a boil!

For blended fabrics that contain both synthetic and natural fibers, use iDye for Natural Fabrics with the corresponding iDye Poly colour, AT THE SAME TIME!

Or try pairing two different colours for more interesting two-tone heather effects.

iDye Poly may also be used for sublimation transfer techniques and to dye the polyester threads that are used to sew many commercially manufactured garments.

A single iDye packet (14gm satchel) will dye 1-1.3 kg of dry fabric, and includes colour intensifier. 

Use on polyester, nylon, poly/cotton blends, plastics, acrylic and more.

Fixative not required.

Suitable for a wide range of absorbent surfaces such as fabric, canvas, paper, wood and more.

These colours are suitable for light and dark coloured surfaces, with extra thick coverage that doesn't require a white base or second pass.

They can also be used as a fabric paint with brush, roller etc.

• Permanent
• Non-toxic
• Chemical free
• Environmentally friendly formula tested to AS/NZ 8124.3
• Clean up with water
• Colours can be mixed
• Made in Australia

If using to paint or print on fabric items that you want to wash, you must heat set the inks before first use. You can print on cotton and polyester. If you won't be able to heat set your item as per below instructions (ie because it will melt/burn the fabric), you can use Poly Prop Additive to make the ink air cure.

These inks are heavily pigmented for extra coverage on dark fabrics. They can be more difficult to print with that inks for light fabrics. Please see Printing Tips For Darks (.pdf) in downloads tab for extra information and printing tips.

Screens can be mounted to the screen with double sided tape and removed and replaced when required.

Suitable for most printers.

For use with home iron or heat press.

APPLICATION INSTRUCTIONS

- WHITES AND LIGHTS Items You Will Need

- white or light coloured cotton or cotton/polyester blends

- heat press or iron (do not use steam)

- hard, smooth, heat proof surface Printing Your Image

- bring paper to room temperature before printing

- be sure to mirror or flip your image prior to printing (unless your chosen printer setting does so automatically)

- print your image on the plain side with no lines

- print image on transfer paper in your printer recommended print settings: HP

- Media: Iron on T-Shirt Transfer, Print Mode: Normal or Best Epson

- Media: Plain Paper, Print Mode: Photo Canon

- Media: Photo Paper Plus Glossy, Print Mode: High Lexmark

- Media: Plain Paper, Print Mode: Best

- do not use in printers that have heating elements in them, such as the Hewlett-Packard 1200C

- for best results trim away any non printed areas of paper Using a Heat Press

- preheat press to 190°c

- press the garment for 3-5 seconds to release moisture and and remove wrinkles

- place printed image face down on garment so the lined side faces up

- set at high pressure 60psi for best results

- press for 30 seconds

- wait 5 seconds then remove backing paper while still warm using a smooth even motion Using a Hand Iron

- preheat your iron to the ‘linen’ or hottest setting without steam

- pre iron your garment to release moisture and smooth wrinkles

- place printed image face down on garment so the lined side faces up

- use firm steady pressure, hold iron with both hands and use your body weight for extra pressure

- iron on each area of the sheet for 20 seconds making sure to lift the iron completely when moving to a new position, overlapping the last section a little

- continue until you have completely ironed the entire sheet, making sure to cover all edges and corners

- wait 5 seconds then remove backing paper while still warm using a smooth even motion

Washing Instructions

- turn the garment inside out

- wash in cold water

- use a mild detergent for best results

- do not use bleach or bleach alternative detergents

- remove the garment promptly from the washer as the colour may bleed if left

- dry on low temperature

- do not iron transferred area

Paper Storage

- store unused transfer papers in a resealable poly bag in a flat, cool, dry area

The full-coverage water-based fabric paint for school, hobby, leisure and craft.

Especially for dark, but also light non-finish cotton, linen, silk, jute and blended fabrics up to max. 20% synthetic fiber content.

Excellent for painting and stenciling.

Textil plus is extremely resistant to washing up to 40 ° C after fixation.

KIT CONTAINS

6 x Textil plus 15 ml
• Medium yellow 021
• Carmine red 032
• Dark ultramarine 055
• French green 015
• White 070
• Black 073

1 x brush
• Marabu Universal flat size 8

Full coverage fabric paint for dark fabrics
Water-based
Washable up to 40 °C
Opaque
Soft to the touch
Ideal for fabric painting and fabric printing
Iron fixing or oven fixing

INSTRUCTIONS

Wash out finishes and fabric conditioners before painting. Paint Marabu Textil plus on the dry fabric and leave to dry. Then iron each painted section (50 x 50 cm) from the front through a thin cloth for 5 minutes at cotton setting or fix in the oven for 8 minutes at 150°C.

Afterwards Marabu Textil plus will be perfectly washable up to 40°C.

Simply clean brushes and other tools with water immediately after use.

Always wash and iron textiles inside out or iron from the front through a cloth.

• Works on both light and dark fabrics

•  Machine washable

•  Water based and acid free

•  Nontoxic

•  Bullet tip is great for doodling, stenciling, coloring and writing!

Suitable for a wide range of absorbent surfaces such as fabric, canvas, paper, wood and more. These colours are suitable for dark coloured surfaces, with extra thick coverage that doesn’t require a white base or second pass.

You can also use these inks on light surfaces, but they have a thick body/feel compared to the Screen Printing Ink For Lights range. They can also be used as a fabric paint with brush, roller etc. 

• Permanent

• Non-toxic

• Chemical free

• Environmentally friendly formula tested to AS/NZ 8124.3

• Clean up with water

• Colours can be mixed

• Made in Australia 

If using to paint or print on fabric items that you want to wash, you must heat set the inks before first use. You can print on cotton and polyester. If you won’t be able to heat set your item as per below instructions (ie because it will melt/burn the fabric), you can use Poly Prop Additive to make the ink air cure

These inks are heavily pigmented for extra coverage on dark fabrics. They can be more difficult to print with that inks for light fabrics. 

Please see Printing Tips For Darks in downloads tab for extra information and printing tips.