Angelus acrylic leather paint is the highest quality paint for sneaker customisations.

Angelus Leather Acrylic Paint will not crack or peel when prepped and applied properly.

Angelus Leather Paint is water-based for easy clean-up and is mixable for countless custom colours!

Angelus Neon Paints are semi-translucent, therefore an even base coat of White Paint is always recommended.

Directions for Use
Prepare smooth leather surfaces using Angelus Preper and Deglazer. When dry, wipe with a microfibre cloth to remove any remaining dust particles.Apply paint with a fine brush or sponge. Angelus paint may be applied with an airbrush using a 0.3533 needle or larger without thinning. If airbrush needle in smaller than 0.35mm or thinner paint is desired, mix Angelus Paint with Angelus 2-Thin. Allow to dry for at least 24 hours before allowing paint to bend or flex. If a lower shine is desired mix paint with Angelus Duller. For a different sheen, use an Angelus Acrylic Finisher of your choosing.

Also works on Canvas, Denim, Faux Leather, Mesh, Nylon, Wood and much more.An applicator brush is attached to the inside lid of bottle.

Clean up with water.

For more tips and tricks visit YouTube.com/AngelusBrand

Made in USA since 1907.

They are practically odourless and even in thick layers, the satin paint film remains flexible and prevents cracking. The creamy medium viscosity keeps the brush strokes and textures, but can also be used for easier smooth coverage.

Need something special? Discover t

he possibilities of our 17 Specialty Colours – metallic, pearl and reflex colours – that complement the balanced palette of this medium viscosity paint. Excellent adhesion on canvasses and walls – or use it on almost any other surface that you like.

View colour chart for light fastness and opacity ratings per colour.

Sets contain 6x 20ml tubes

Genuine alkali-refined linseed oil. Increases flow, transparency and gloss. Useful as ingredient in painting mediums.

Angelus acrylic leather paint is the highest quality paint for sneaker customisations.Angelus Leather Acrylic Paint will not crack or peel when prepped and applied properly.Angelus Leather Paint is water-based for easy clean-up and is mixable for countless custom colours!

Once applied with enough coats, these metallic paints will give off a nice metallic sheen. Applying a base coat of a light colour (such as white) is recommended when working on darker surfaces.

Looking for the Jordan DMP Gold colour? Mix the Gold colour from this range with a tiny bit of Flat Black paint to replicate the DMP colour.

Directions for Use
Prepare smooth leather surfaces using Angelus Preper and Deglazer. When dry, wipe with a microfibre cloth to remove any remaining dust particles.Apply paint with a fine brush or sponge. Angelus paint may be applied with an airbrush using a 0.3533 needle or larger without thinning. If airbrush needle in smaller than 0.35mm or thinner paint is desired, mix Angelus Paint with Angelus 2-Thin. Allow to dry for at least 24 hours before allowing paint to bend or flex. If a lower shine is desired mix paint with Angelus Duller. For a different sheen, use an Angelus Acrylic Finisher of your choosing.

Also works on Canvas, Denim, Faux Leather, Mesh, Nylon, Wood and much more.An applicator brush is attached to the inside lid of bottle.

Clean up with water.

Many thin coats and better than one thick coat.

For more tips and tricks visit YouTube.com/AngelusBrand

Made in USA since 1907.

When heat-set properly, this Fabric Medium will help keep your fabrics nice and soft after being painted.

Directions: Mix Angelus 2-Soft with Angelus Acrylic Paints in a 1:1 ratio.

Apply multiple coats until you obtain full and even coverage.

Allow paint to completely dry.

Heat-set using a heatgun at 300º F for 3-5 minutes (this step is REQUIRED).

Warning: This product contains Formaldehyde, a chemical known to the State of California to cause cancer.

Use with proper ventilation.

After using Angelus Leather Acrylic Paint, apply Angelus Acrylic Finisher 600 to your customised sneakers to help protect the paint from minor scratches/scrapes.

Acrylic Finisher No 600 has a gloss finish.

• Semi to high gloss top finish for use on all smooth leathers
• Apply with a sponge, rag, wool, spray gun, or brush and let dry
• No buffing needed
• Water-based product cleans up with soap and water
• Water resistant
• Will not rub off, crack, peel, or streak
• Great when used over different finishes where a uniform finish is desired
• Flexible enough for belts, shoes, handbags, saddlery/tack, and upholstery